Timber & board

Timber Batch process

Handheld coding for timber is about marking tickets, board ends and crates before dispatch from sawmills or yards. We tailor the process for South African heat, dust, and shift deadlines.

Walk path that holds

Ink / cartridgeWood-safe pigment cartridge
Print / walk25.4 mm · rough grain mode
PowerYard pack · dust flap
Typical fieldsSee Fields paired to this device

Use the contact form if you want a sketch for your bay layout.

Who the timber batch process fits (and who it does not)

Timber Batch suits sawmills, board yards, and outdoor plants that need to mark timber, plywood, OSB, crates, or composite board as stock moves between lines, drying yards, or loading bays. If your shift needs batch codes on timber while walking the floor or working outdoors, especially under power cuts, Highveld dust, or coastal humidity, this process fits. It is not aimed at high-gloss furniture workshops or varnished product lines with slow, fixed conveyors. This is for operators who need portable marks on rough substrate, getting through a full morning before the next carton swap.

You may also consider Timber Batch if your team has to code lots before the bakkie leaves, often in loud or busy areas where fixed printers cannot reach every corner. If most coding is static, a Timber Batch device is likely overkill.

How the process works on a South African shift

Operators collect the coding gear at shift start: the handheld device, wood-safe pigment cartridge, care note, and a check card with template info. The template is loaded for that week's codes, cartridge is checked, and the print head wiped clean. The operator names the substrate and walk path, stacked pine in Midrand, or kiln-dried plywood in Gqeberha. Marking usually starts before the aisle gets busy. The first good mark is photographed for quality and tracked as the batch reference.

During the walk, the operator marks tickets, board ends, or crates, adjusting height or pressure as the cartons or boards change. Walk height is logged if the box size varies mid-shift. There is no need to read a long manual: instructions are pinned above the bay, and a template note covers the day’s info. Where field codes change, operators pair the device with new Fields or update codes as needed. This structure means coding keeps up with the real pace of South African yards, export packs, and unpredictable weather.

Example: Marking board ends in a Gauteng yard

On a winter morning in Germiston, a yard team codes batches of structural pine before loading. The operator checks the pigment cartridge and wipes the head with the supplied cloth. The correct template for “Monday-Export” is loaded, and the first timber end is marked. After confirming print clarity, the operator photographs the result and pins the photo to the shift folder on the factory phone. As the team walks the board aisle, each stack is marked at the correct height, with walk height noted when board widths shift. If a mark smears, common in cold or wet bays, the operator refers to the care note and swaps pressure or walk speed accordingly.

At the end of the shift, the operator has a clear batch record and can hand off board, template, and mark notes to the foreman. If a crate needs extra markings for a Durban export, a second template is loaded from the backup card. If coding was missed, the pre-photographed good mark provides proof for municipal paperwork or a quick rework.

What to prepare before you email us

To match the right coding gear to your timber or board process, we need clear information up front. This helps avoid back-and-forth and ensures the right kit arrives for your shifts. Before you send a message through our contact form, prepare the following:

If you have already tried a certain ink or cartridge, mention what worked and what failed. Substrate surface, raw, planed, coated or composite, affects the ink pairing. Walk path and coding speed influence template and print head settings. A photo of your typical mark helps us check for issues like excessive grain or humidity smears.

Common pitfalls and how to avoid them

Most failed timber batch shifts are due to missed batch photos, incorrect ink for coated or wet timber, or forgotten template swaps when cartons change mid-shift. Smudged marks in a cold Bloemfontein warehouse or soft ink in Durban humidity are avoidable by matching the right cartridge, pressure, and walk speed.

Skipping the first good mark photo means the team may scramble for proof at dawn. Forgetting to pin care notes by the aisle leads to confusion when the operator swaps to a new carton. Relying only on memory, not field notes, risks lost marks or wrong codes when busy. We recommend every operator reads the paired Codes note before the shift and logs the first successful mark as written evidence.

Where to go next for other needs

If your coding needs are broader than timber or you need to see what works on other substrates, explore our Devices range or see how different Cartridges suit varying climatic conditions. For help on integrating field paths and templates, our Fields and Codes notes give specifics you can hand to new operators.

Specs you can brief against

Ink / cartridgeWood-safe pigment cartridge
Print / walk25.4 mm · rough grain mode
PowerYard pack · dust flap

What our Handheld Printer customers say

Verified Google reviews

Talk to the coding bay

Contact form · Midrand coding bay